*** Please read all Important Notes below before purchasing ***
5.25 inch HOLO Dahlia Silicone Mold for Resin casting.
This layered mold is handmade with built-in holographic surface that gives beautiful rainbow effect to your resin castings.
Finished resin product is 5.25 inch diameter and approximately 1/4 inch thick.
Listing is for 1 silicone mold only. Finished resin product not included.
Tips on how to use HOLO Molds:
- Let your epoxy resin cure completely hard before demolding. Do not use these molds with UV resin since UV resin needs clear molds to cure properly.
- Do not brush mica powder directly on the mold. Best way is to mix colorant and glitters in epoxy resin first then pour into the mold.
- Do not put top coat on the holo side of the resin piece. Holo effect will disappear if submerged in resin.
*** All HOLO molds are 100% handmade from mixed materials. There will be some imperfection on mold surface but it will still give off beautiful holographic effect for your artwork.
*** HOLO surface is fragile so please accept scratches with uses.
*** Please feel free to sell any resin artworks made from this mold, but replicating my mold design is strictly prohibited.
*** Like all other molds, HOLO molds will get dull over time, but if you don't use heat when resin is inside the molds, your HOLO molds will last longer.
***Silicone mold received will be in random color. No custom mold color.
*** This silicone might not be compatible with pressure pot.
*** Do NOT expose silicone mold to heat by using torch or heat gun while resin is inside the mold. Heat will damage mold surface.
*** This mold is NOT food safe.
*** Please make sure to read and agree with my Shop Policy for any FAQ's before you purchase my molds!